1. <table id="smmcx"><th id="smmcx"></th></table>
  2. Product

    Hammer Crusher

    Capacity:3-45t/h

    Feeding size:<350

    Output Size:0-22

    Hammer crusher is equipment using high-speed rotary hammers to crush materials, mainly applied to the industries of metallurgy, mining, chemistry, cement, construction, refractory materials and ceramics. It can crush hard and soft ores into medium or smal

    Inquiry Contact

    Information

     

    Advantages and Features of hammer crusher :

    1.high capacity, high crushing ratio
    2.uniform particle size, simple structure
    3.Low investment, easy management and maintenance.
     
    Working principle of hammer crusher:
    Hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.
     
    Main Specification of hammer crusher :
     

    Type

    PC400x300

    PC600x400

    PC800x600

    Rotor Diameter /mm

    400

    600

    800

    Rotor Width/ mm

    300

    400

    600

    Rotor Speed/  r/min

    1100

    1000

    900

    Max Feeding Size/mm

    <100

    <220

    <350

    Finished particle size /mm

    0-10

    0-20

    0-22

    Capacity / t/h

    3-8

    8-15

    15-45

    Power /kw

    11

    18.5-22

    45

    Hammer Number /pieces

    12-16

    12-20

    20-28

    Dimension L*W*H/mm

    855*795*860

    1150*1095*1230

    2360*1490*1415

     

     

    Feedback

    Recommend

    Ultrafine Grinding Mill

    Capacity:0.5-30 t/h
    Feeding size:≤20mm
    Output Size:5-74um/mesh
    Info:HGM Series ultrafine grinding mill is the equipment specializing in producing fine and superfine powder of non-inflammable...

      Contact us

    • Office Address: No.19Fuqing Rd,Shanghai
    • E-mail: Sales@clirik.com
    • Sales Department Tel 0086-21-20236178

    Copyright 2014 by Shanghai Clirik Machinery Co. LTD All rights reservedE-mail:sales@clirik.com

    手机看片